Call Now! (805) 910-7066

Concrete Adhesive Removal Service Los Angeles CA 2021-12-10T12:26:49+00:00

No Job Too Small or Too Large!

Get A Quote Now- Call (805)910-7066

What We Do







We Remove All Concrete Adhesive Removal: So your substrate will be ready for its next floor- Call (805) 910-7066

No matter what type of Concrete Adhesive Removal Services you may be seeking, you can rely on Concrete Adhesive Removal Pros. We offer comprehensive:

Mastic Removal

Black mastic removal from old VCT tile is a job for a specially trained contractor with the proper tooling.

Black Mastic Under VCT

Mastic is the glue that holds down carpet, VCT (vinyl tile), and other flooring systems. It is often adhered directly to the concrete and is very difficult to remove without certain equipment. WE HAVE the specialty equipment and tooling to perform even the toughest mastic removal projects.

We are specialized in a variety of mastic removal projects and are equipped for any floor adhesive removal your project requires. Some tile adhesive is very difficult to remove from concrete, making your desired result seem an impossibility. We can provide the flooring removal or just the following mastic types down to the bare concrete without harsh chemicals so you can have the floor you want!

  • Cutback Adhesive or Black Mastic Removal
  • Tan Mastic or other Tile Adhesives
  • Carpet Adhesive (Carpet Glue)

Cutback Adhesive Removal

Black cutback adhesive is often found in older buildings (prior to 1984), factories, or warehouses. It is a thick, asphaltic substance that can seem impossible to remove or bond to again. There are mastic remover products available, but the best method for completing removing is by wet grinding.Other mastic remover solvents can have heavy fumes and toxic clean-up. Not to mention asbestos. This older black mastic, most often contains asbestos and should require a professional mastic remover. WE can remove asbestos in most states with no additional cost to the contractor or owner.

If leveling compound is found present during a VCT and Mastic removal project, the floor is not suitable for polishing. Leveling Compound Under VCT and Mastic

WE can diamond grind all evidence of mastic down to bare polished concrete by a combination of wet scraping and grinding. On many projects, removing mastic will present new challenges in each room depending on the

conditions during the time of installation. For example, we performed a VCT and mastic removal and cutback adhesive removal where we were going to polish the existing concrete beneath it due to moisture vapor transmission problems. When the vinyl tile was removed, it was discovered that the mastic was on top of a leveling compound.

Cutback adhesive typically requires complete removal prior to application of the tile adhesives as the two products are not compatible and will not bond. In this case completely removing cutback adhesive is necessary and is best performed by a mastic removal contractor.

 Tile Adhesive Removal

In addition to black mastic removal, there are other vinyl adhesives or tiles glues that you might require to be removed to the bare concrete. Some of these are tan mastics, thin set, or other contact glues. If the concrete beneath the tile adhesive is going to be polished, it is important to remember that the grid pattern beneath the tile will remain visible, we call this ghosting. WE do not use an adhesive remover because of the toxic fumes that are often associated with these types of solvents. Instead we use a diamond grinding method to eliminate the vinyl adhesives.

Carpet Adhesive Removal

Carpet mastic removal is sticky and more difficult to remove than vct mastic.

Carpet Removal Reveals Carpet Mastic

Carpet adhesive removal presents a different set of challenges. It can be a sticky, gummy mess for those trying to remove carpet glue from concrete. We have the tools necessary to perform this floor glue removal service at your project.

Compatibility of the old and new mastics will determine the scope of floor mastic removal required. It is important to ensure the long term compatibility of any mastic to be left on the floor with the new products to be installed. Floor mastic compatibility may not be issue immediately but can become a serious issue over just 2 or 3 years. WE always recommend complete floor adhesive removal down to bare, clean concrete. Sometimes budget constraints do not allow for complete mastic removal, and consultation with the flooring installer or project specifier is a must to ensure compatibility

WE haves seen projects where mastics have been skim coated with a cementitious material and then new mastic and tile applied. Again, everyone makes decisions based on the funds available and the intended duration of the finished tile or carpet project, but we feel that it is safe to say that this is at best a compromise to the best cast scenario, which of course be have all the old mastic removed and install the new mastic and new tile directly on bare concrete.


Concrete Grinding And How Much Can A Grinder Remove?

Most people are searching for what concrete grinding is? Another important question for all newbies is how much will a concrete grinder remove?

Let’s go deeper into details. Concrete grinding is a mechanical treatment process of the surface using special equipment, like Husqvarna or HTC, combined with abrasive diamond tools. The metal segment attachments procure the removal of unevenness on rough concrete surfaces to reveal a smooth finish. In addition, there are grinding diamond tools to help make the process faster.

Have you ever been struggling to remove old mastic or glues, waterproofing membranes, or epoxy coatings from a concrete surface? It’s a bit of a challenge most concrete resurfacing contractors, fluid floor applicators, and even waterproofers have. The main goal is to simplify the methods of removing materials from concrete surfaces. Thus, preparation to reapply a coating, membrane, or adhesive will be enjoyable.

Why It Is The Best Method Of Concrete Floor Prep?

First, concrete mechanical treatment can be accomplished either dry or wet. Prepping the floors before installing hardwood or tiles is the best way to ensure the floors’ endurance.

It is also important when the concrete will be polished or coated with epoxy, as the quality of the surface will show through.

What Are The Benefits Of Concrete Mechanical Treatment?

  • Rebuild concrete surfaces. Removes all inconsistencies and imperfections, resulting in a usable and smooth surface.
  • Remove dirt, paint, or mastic. The best way to get rid of different remnants left on the concrete.
  • Install flooring (coatings, carpets, or tiles). A contractor can easily install any flooring on a smooth surface. Floor prep is key in the longevity of a new covering option.

How Much Will A Concrete Grinder Remove?

Let’s find out how much will a concrete grinder remove? As a matter of fact, a concrete grinder can remove as much concrete as you wish, but its limitations are:

  • the hardness of the concrete;
  • the type of diamond tooling;
  • the amount of time you spend on the floor.

A small planetary concrete grinder with basic grinding tools will remove around 1/16” of the concrete in 1-2 passes in a normal situation. You might be able to remove more – 1/8’’ if use a heavier concrete grinder and more aggressive PCD tools. In fact, an angle grinder with a cup wheel will do the best job.

It will be easier to grind in the case of soft concrete, especially if you use highly aggressive PCD tools for concrete layer removals like glue, black mastic, or other imperfections.

Lastly, the more pressure you put on the grinder, the more wear you put on the diamond tools. If you need to remove a thicker layer of concrete faster, you may need an extremely soft bond grinding pad.

Finally, concrete grinding is often seen as a finishing or refinishing procedure. But if you have a thick layer to remove, contractors suggest a complete demo and re-pour the slab.

How Long Does Grinding Take?

Do people also ask about how long does grinding takes? As a matter of fact, the time of concrete grinding depends on a few factors:

  • How big is the project?
  • Whether the area is quite open, or it consists of a lot of small spots?
  • What kind of finish do you expect – polishing or sealing?
  • How much exposure of aggregate do you want to see?
  • What kind of shine do you desire?
Concrete Grinding

How Much Does It Cost To Grind Concrete?

In fact, concrete grinding contractors normally charge around $0.75-$2.85 per square foot for light concrete sanding. This makes the floor ready to install a new floor covering. Moreover, check out the ranges for different types of glues or mastic removal:

  • A thin layer of epoxy paint, VCT glue, or mastic: $1 to $1.2 per square foot.
  • Thick coatings 1/8-1/4”: $1.3 to $1.5 per square foot.
  • Black heavy mastic (multi-layer): $1.5 to $2 per square foot.

Do you want to know how much will a concrete grinder remove? Here are the answers, along with other commonly asked questions.

The beauty of choosing a full exposure aggregate of  for your space – whether residential or commercial. Is that you got a truly unique floor. No two concrete floors are the same, as it all comes down to concrete quality, technique, and aggregate amount.

However, most people don’t know how to achieve that shiny and refine style. Also, aggregate exposure ranges from minimal to open-stone exposure depending on the depth of the rocks inside the concrete and grinding.

Concrete Grinding Contractors Near Me

Firstly, your best option to find out the floor prep cost in your area is to contact a contractor. Secondly, request a  to find out the best competitive price from your Concrete Contractors Near Me. Lastly, if you’re getting into the game of floor renovation,  will most likely help to avoid wasting time and money on your first few jobs.

Consequently, in this article, we learned what ground concrete is? Also, what is the best prep method? And how much will a concrete grinder remove? Feel free to ask our specialist a question.

Our Home Owners Say

Kyle was great, came in and removed  the glue so we could lay our new floor. Very personable and I was impressed how the concrete looked after the glue was removed.

Cassie T., Westlake Village, CA

I looked them up on the internet. I was pleased at how fast they responded to me. We set a schedule for them to come out and remove the old tiles with tile ashesive. They were very helpful and explained the process to me. They fixed the issue within 2 hours. Highly recommended.

Abhi Patel, Lake Sherwood, CA

great service, quality work, super fast response time, I could not be any more satisfied. If and when I buy another investment property, I know who I`m calling.

Jennifer L., Westlake, CA